E-FLITE Blade MCX Tandem Rescue, Инструкция по эксплуатации

Страница: 13 / 22

24 25 24 25
The elevator stick controls fore and aft pitch of the helicopter. Pushing the stick
forward will pitch the nose of the helicopter downward, allowing the helicopter to be
flown forward.
Mode 1
Mode 2
Helicopter Moves Forward
Pulling the elevator stick backward will pitch the tail of the helicopter downward,
allowing the helicopter to be flown backward.
Mode 1
Mode 2
Helicopter Moves Backward
The elevator trim can be used to help keep the helicopter from drifting forward or
backward when in hover with no elevator stick input. For example, if the helicopter
drifts forward when in hover, add back/up elevator trim until the helicopter hovers as
level as possible with no forward drifting.
Moving the aileron stick to the left will roll the helicopter to the left, allowing the
helicopter to be flown sideways toward the left when viewing the helicopter from
behind.
Mode 1
Mode 2
Helicopter Slides Left
Moving the aileron stick to the right will roll the helicopter to the right, allowing the
helicopter to be flown sideways toward the right.
Mode 1
Mode 2
Helicopter Slides Right
Note: This command does not cause the nose of the helicopter to turn! Rather,
it causes the helicopter to bank, and then slide left or right. Use of the
rudder stick (the left stick) is required to point the nose of the helicopter in
the desired direction.
The aileron trim can be used to help keep the helicopter from drifting left or right
when in hover with no aileron stick input. For example, if the helicopter drifts to
the right when in hover, add left aileron trim until the helicopter hovers as level as
possible with no drifting to the right.
Once you’re familiar with the primary controls of the helicopter, you are almost ready
to fly.