E-FLITE Apprentice Скачать руководство пользователя страница 43

Страница: 43 / 48

E-flite Apprentice Assembly Manual

If you choose to pay by credit card, please include your credit card

number and expiration date. Any repair left unpaid or unclaimed

after 90 days will be considered abandoned and will be disposed of
accordingly.

Please note: non-warranty repair is only available

on electronics and model engines.

Electronics and engines requiring inspection or repair should be

shipped to the following address:

Horizon Service Center

4105 Fieldstone Road

Champaign, Illinois 61822

Horizon Hobby UK

Units 1-4, Ployters Road

Staple Tye - Southern Way

Harlow

Essex

CM187NS

United Kingdom

Horizon Technischer Service

Otto-Hahn-Str. 9a

25337 Elmshorn

Germany

Telephone: +49 4121 46199 66

Fax: +49 4121 46199 70

Mail: [email protected]

All other Products requiring warranty inspection or repair should be

shipped to the following address:

Horizon Support Team

4105 Fieldstone Road

Champaign, Illinois 61822

Please call 1 877 504 0233 or visit horizonhobby.com to find

our distributor for your country for support with any questions

or concerns regarding this product or warranty.

Safety, Precautions, and Warnings

As the user of this product, you are solely responsible for

operating it in a manner that does not endanger yourself

and others or result in damage to the product or the property

of others.

Carefully follow the directions and warnings for this and any

optional support equipment (chargers, rechargeable battery

packs, etc.) that you use.

This model is controlled by a radio signal that is subject to

interference from many sources outside your control. This

interference can cause momentary loss of control so it is

necessary to always keep a safe distance in all directions around

your model, as this margin will help to avoid collisions or injury.

• Always operate your model in an open area away from cars,

traffic or people.

• Avoid operating your model in the street where injury or

damage can occur.

• Never operate the model out into the street or populated areas

for any reason.

• Never operate your model with low transmitter batteries.

• Carefully follow the directions and warnings for this and any

optional support equipment (chargers, rechargeable battery

packs, etc.) that you use.

• Keep all chemicals, small parts and anything electrical out of

the reach of children.

• Moisture causes damage to electronics. Avoid water exposure

to all equipment not specifically designed and protected for

this purpose.

Содержание Apprentice

















































Результаты поиска

Содержание Apprentice

Отзывы:

Похожие инструкции для Apprentice

Бренды по названию

Популярные бренды

E-FLITE Apprentice, Инструкция по сборке

Результаты поиска

Содержание Apprentice

Отзывы:

Похожие инструкции для Apprentice

Бренды по названию

Популярные бренды