5
ASSEMBLY
ALWAYS
make sure the unit is
unplugged before
beginning
assembly
!
NEVER
move or
clean the heater, or change the bulbs, while it is
plugged in
.
1) Carefully turn the
STOVE (A)
upside down and lay it on a clean soft surface.
2) Insert the
TAB
of one
LEG (B)
into the
SLOT
in the corner of the stove frame.
3) Thread two
SCREWS (C)
through the holes in the leg and into the stove frame. Partially
tighten the screws with a Phillips screwdriver.
4) Repeat Steps 2 and 3 for the other three legs.
5) Check the alignment and tighten all 8 screws securely with the screwdriver.
DO NOT over-tighten the screws.
ALWAYS
attach the feet before using!
NEVER
plug in or operate this unit if the feet are
not securely attached!
OPERATION
Control Panel
:
Lower right hand corner of the insert. Open the door to access it.
A
C
C
B
Tab
