background image

 

2

IMPORTANT SAFETY INSTRUCTIONS! 

 

 

WARNING 

  Read all instructions before using this heater! 

  This heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If 

provided, use handles when moving this heater.  Keep combustible materials, such as 
furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of 
the heater
, and keep them away from the sides and rear

  Extreme caution is necessary when any heater is used by or near children or invalids and 

whenever the heater is left operating and unattended

  DO NOT operate any heater with a damaged cord or plug or after the heater malfunctions

has been dropped or damaged in any manner. Discard heater, or return to authorized service 
facility for examination and/or repair. 

  DO NOT run power cord under carpeting. DO NOT cover power cord with throw rugs, runners, 

or  similar  coverings.  DO  NOT  route  power  cord  under  furniture  or  appliances.  Arrange  power 
cord away from traffic area, and where it will not be tripped over. 

  Connect to properly grounded outlets ONLY.  

  DO  NOT  insert  or  allow  foreign  objects  to  enter  any  ventilation  or  exhaust  opening,  as 

this may cause electric shock or fire, or damage the heater.  

  To prevent a possible fire, DO NOT block air intakes or exhaust in any manner. Doing so could 

cause a fireDO NOT use on soft surfaces, like a bed, where openings may become blocked. 

  A  heater  has  hot  and  arcing  or  sparking  parts  inside.  DO  NOT  use  it  in  areas  where 

gasoline, paint, or flammable liquids are used or stored.  

  Use  this  heater  only  as  described  in  this  manual.  Any  other  use  not  recommended  by 

the manufacturer may cause fire, electric shock, or injury to persons. 

  ALWAYS  plug  heaters  directly  into  a  wall  outlet/receptacle.  NEVER  use  with  an 

extension cord or relocatable power tap (outlet/power strip).  

  DO NOT place the heater near a bed because objects such as pillows or blankets can fall off 

the bed and be ignited by the heater.  

  NEVER use this heater in bathrooms, laundry rooms, or any other location where the heater 

could fall into a bathtub or poolbecome damp, or come in contact with water

  AVOID FIRE! Regularly inspect all air vents to make sure they are free from dust, lint, or other 

blockage. Unplug the unit and clean with a vacuum ONLYDO NOT rinse or get wet. 

  ALWAYS attach all four legs before plugging in or turning on this heater!  Failure to do so 

could result in fire

  NEVER plug in or turn on this heater with the air vents touching the ground!  Doing so could 

result in fire

 
 
 
 
 
 
 

Содержание EFS-XB24B









Отзывы: