5
You have the following controls:
Turn on/off the device
1. POWER ON/OFF BUTTON - Power to the unit
2. SOUND BUTTON - Press this button to turn on/off the sound effect
3. FLAME BRIGHTNESS ADJUSTMENT - Press the button to change the flame brightness, it has
5 classes flame brightness to adjustable from L5-L4-L3-L2-L1.
4. HEATER SETTINGS - This fireplace insert consists of a fan forced electric heater with two
heater settings, 800W(L) or 1,500W(H). Press the button once to turn on the Low heater press
the button a second time to turn on the High heater, press the button the third time to turn off the
heater. Note: the fan may continue to run for a short time after the heater is turned off. The fan
will turn off automatically
5. ADJUST THE TIMER - Period timer from 0.5 to 7.5 hours. The heater will operate for 0.5 hour to
touch, and so forth. The heater will stop heating when the time is exhibited. Use the CR025 3V
battery for remote control.
GLASS INSTRUCTIONS
1. Under no circumstances should this product be operated with a broken or chipped glass
panel.
2. Do not strike or slam the glass.
3. Do not use abrasive cleaners to clean the glass. Make sure the glass is cool to the touch.
4. This product uses tempered glass. Replacement of the glass supplied by the manufacturer
should be done by qualified/authorized personnel only.
MAINTENANCE OF MOTORS
1. Always disconnect the unit from the main power supply and allow it to cool before any
servicing operation.
