E.F. Johnson Company VIKING VX, Руководство пользователя

Страница: 44 / 198

PULL DOWN MENUS
4-6
August 2000
Part No. 001-2001-200
4.3.6 TELEPHONE PARAMETERS
Refer to the Telephone Interface Card manual,
Part No. 004-2000-370, for information on the Tele-
phone Access Parameters, Telephone Interface and
TIC Calibration Data.
4.4 TRANSFER
Figure 4-13 TRANSFER MENU
4.4.1 WRITE SETUP PARAMETERS
This command sends the contents of a file to the
repeater and programs the EEPROM memory in the
Main Processor Card (MPC).
Figure 4-14 WRITE SETUP PARAMETERS
Figure 4-15 PROGRAM WRITE SETUP
4.4.2 READ SETUP PARAMETERS
This command reads the contents of the
EEPROM memory of a repeater and loads it into a
buffer. The contents of the buffer is then displayed to
show the programming of the repeater.
Figure 4-16 READ SETUP PARAMETERS
Figure 4-17 READING SETUP
Read Setup Parms F5
Write Setup Parms F6
Edit Option Keys
Read TIC Calibration Data
Write TIC Calibration Data
File Edit Transfer Hardware Test Utilities
Program Rptr 1
Ok Cancel
Programming Setup Parameters
Count = 1
Ok Cancel
Read Setup Parms?
Reading Setup Parameters
Attempting access to Repeater
Figure 4-18 HARDWARE PROGRAMMING FLOWCHART
Home
UID
GoTo
GID
Data Received From Radio
Data Transmitted to Radio
Home
UID
GID
Pri
Stat
Time
HSDB Monitor
RX/TX Data
HARDWARE
RF Data
RF Line Monitor
Mode Select
Normal
Test
Revisions
Repeater (1-20)
TTY Terminal