LTR FEATURES
48
LTR FEATURES
Standard and Telephone Calls
Standard calls are between two mobiles or between a mobile and a
control station. Telephone calls allow you to place and receive calls over
the public telephone system using your transceiver. Standard calls are
described starting on page 19, and telephone calls are described starting
on page 21.
Busy Queuing (LTR)
The LTR busy queuing feature places a telephone call in a queue if
the radio system is busy when it is placed. Then when the system
becomes available, the call is automatically placed. Standard (mobile-to-
mobile) calls are not queued by this feature. If queuing is programmed
and a busy condition is encountered, the queue mode is entered automati-
cally when the PTT switch is released. The queue mode is indicated by
“IN QUEUE” on the bottom line of the display as shown below.
When the radio system becomes available, it is automatically
accessed. A beep then sounds and a dial tone is heard. The call can then
be placed if desired. The queue mode is exited before the call is placed if
any of the following occur (exit is indicated when “IN QUEUE” is no
longer displayed).
•
The PTT switch is pressed
•
Any call is received
•
Any front panel option switch is pressed
•
Power is turned off
Calls are received normally in the queue mode. However, receiving
any call causes the mode to be exited as indicated above. Group scanning
