SYSTEM AND GROUP SCANNING
35
Using Menu Mode
1. To select the menu mode, press the Menu switch or FCN FCN (the
FCN switch twice). The top line of the display indicates the func-
tion being edited, and the bottom line indicates the current status
of that function (see following illustration).
2. To display the various functions that are controllable by the menu
mode (top line indication), rotate the Select switch. The currently
selected status of that function is displayed on the bottom line.
3. To change the selected status, press the Select switch. The selec-
tions displayed for each menu function are shown on page 52.
4. The selected status conditions for the various functions are saved
when the menu mode is exited in one of the following ways:
•
Pressing the FCN switch again
•
Pressing the PTT switch
•
Automatically when time-out occurs 2 seconds after a change is
made or 8 seconds after no changes are made.
SYSTEM AND GROUP SCANNING
General
Introduction
The scan feature monitors, in sequence, the programmed
systems and/or groups in the scan list. When a message is detected
that the transceiver is programmed to receive, scanning stops and the
Function
Status
