manualshive.com logo in svg

E.F. Johnson Company 9800 SERIES, Руководство по эксплуатации

Поделиться
Скачать
E.F. Johnson Company 9800 SERIES Скачать руководство пользователя страница 20

GENERAL OPERATION

20

•

If the zone or channel is changed while scanning is selected, scanning 
continues on the same or a different scan list (see scan list information 
which follows).

Radio Wide Scanning

Radio wide scanning monitors the channels in the preprogrammed 

radio wide scan list (see page 20). This list may contain up to 16 channels 
of any type (conventional or SMARTNET/SmartZone) assigned to any 
zone. Radio wide scanning is turned on and off by the 

RWS

 option 

switch as follows. If this switch is not programmed, radio wide scanning 
is not available. 

•

To turn radio wide scanning on, press the 

RWS 

option switch. The 

 

icon is then displayed continuously and “RWS ON” is displayed briefly 
on the lower line of the display. 

•

To turn radio wide scanning off, press the 

RWS

 option switch again. 

The 

 icon is then no longer indicated and “RWS OFF” is displayed 

briefly.

•

If the zone or channel is changed while radio wide scanning, scanning 
continues normally.

Scan Resume Delay

When a message is received or transmitted while scanning, there is a 

dealer programmable delay before scanning resumes. The delay after 
receiving a call prevents another message from being received before you 
can make a response, and the delay after transmitting a call ensures that 
you hear a response to your call instead of another message occurring on 
some other channel.

Standard Mode Scan List

NOTE: The selected channel is always scanned.

With conventional operation, up to three scan lists can be 

programmed. The list that is scanned is selected by the 

SCAN

 option 

Содержание 9800 SERIES

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды