E.F. Johnson Company 761X страница 35 Скачать руководство пользователя | Manualshive

Страница: 35 / 99

background image

PROGRAMMING

4-10

November 1998
Part No. 001-7600-001

Table 4-4 Continuous Tone Screen Description

Description

The continuous tones programmed in this screen are selected by pressing the C.Tone CH Ent function key (see

Table 4-2) and then pressing the up/down

keys. This allows the user to select the continuous tone being transmitted

and received on the current channel. To transmit or receive using the codes programmed for the channel in the channel screen
(see Table 4-1), select “TON--M” using the

keys.

Table 4-5 Scan Function Screen Description

Parameter

Description

This screen is used to configure each of the up to five scan lists that can be selected. Channels are assigned to a scan list

in the Memory Channel screen described in Table 4-1 and by the TAG key described in Table 4-2. Scanning is turned on and
off and a specific scan mode is selected by the SCAN key also described in Table 4-2. Scanning may be enabled at power on
(see following) and by placing the microphone on-hook (see “Hanger Action” in Table 4-2).

Scan Mode The following conditions are programmable:

Scan Off - Deactivates that scan list so that it cannot be selected.
M1 (Normal) - Selects normal (non-priority) scanning from the lowest to highest channel.
M2 (Prio A) - Selects scanning from the lowest to highest channel while checking the Priority A channel. If

scanning is turned off while receiving a message in the scan mode, the transceiver switches to that channel.

M 3 (Prio A) - Same as Mode 2 except that if scanning is turned off while receiving a message, the Priority A

channel is selected.

Text

Programs the text that is displayed while scanning with that scan list selected. If “OFF” is programmed, the text
is not displayed. Instead, the alpha tag (or channel number) programmed for each channel is displayed as the
channel is scanned. The characters and other information described for “TEXT” in Table 4-1 also applies to this
text.

«
...
33
34
35
36
37
...
»

Содержание 761X




































































































Отзывы:

Нет отзывов

Похожие инструкции для 761X

Бренд: MAJORITY Страницы: 20

VXD-720 digital

Бренд: Vertex Standard Страницы: 28

PERSONAL TWO-WAY RADIO

Бренд: Zartek Страницы: 10

Бренд: Durabrand Страницы: 4

Бренд: LENCO Страницы: 25

Бренд: Banner Страницы: 2

Microtalk PMR 100

Бренд: Cobra Страницы: 12

FX-3 TWIN PMR 446

Бренд: BRONDI Страницы: 14

Бренд: Cobra Страницы: 2

Бренд: Cobra Страницы: 11

Бренд: Cobra Страницы: 11

Бренд: Cobra Страницы: 11

Cobra Micro Talk 2

Бренд: Cobra Страницы: 21

Бренд: Cobra Страницы: 26

Бренд: Craftsman Страницы: 2

Бренд: Honeywell Страницы: 6

Бренд: Honeywell Страницы: 10

Бренд: Alinco Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды