![e-conolight E-XML4 Series Скачать руководство пользователя страница 4](http://html.mh-extra.com/html/e-conolight/e-xml4-series/e-xml4-series_installation-instructions_517957004.webp)
Page 4 of 4
INSTRUCTIONS FOR SELF-DIAGNOSTIC TEST:
Once the unit is properly installed according to the installation instruction sheet and AC power supplied,
the dual color LED indicator will come ON and the self-diagnostic test function will automatically initiate.
The LED indicates the unit’s status. A STEADY GREEN LED indicates normal service; FLASHING
GREEN indicates the unit is testing; GREEN/RED FLASHING indicates the battery is charging; RED (in
different combinations) would indicate a service alert. Refer to the SERVICE INDICATION chart below for
more details. The LED would be OFF when the unit is in emergency mode.
SELF-DIAGNOSTIC SERVICE
The self-diagnostic function is factory preset and performs the following:
a. Monitoring of battery, battery charger, and lamps.
b. Self-testing and a 30-second or longer discharge once every 30 days, after AC power has been
supplied for a minimum of 24 hrs.
c. Self-testing and a 30-minute or longer discharge once every 180 days, after AC power has been
supplied for a minimum of 24 hrs.
d. Self-testing and a 90-minute discharge once every 365 days, after AC power has been supplied for
a minimum of 24 hrs.
SERVICE INDICATION
MANUAL TESTING
WARNING:
The unit also provides for manual testing by pushing the test button in a specific pattern.
n
o
it
a
c
i
d
n
I
D
E
L
&
n
o
it
c
a
e
R
n
o
it
c
A
Push test button Once (within 2 seconds)
30-second test: FLASHING Green
Push test button Twice (within 2 seconds)
30-minute test: Green FLASHING twice
Push test button Three times (within 2
seconds)
90-minute test: Green FLASHING three times
Push test button and hold for 3 seconds (In
test mode)
Cancels test. If self-test is cancelled it is recommended that a
manual test of the same duration be performed at a more
convenient time to ensure compliance
Push test button and hold for 6 seconds (In
test mode)
System reset
a) Make sure that power is OFF before making any electrical connections.
b) Unused wires must be capped using enclosed wire nuts.
s
u
t
a
t
S
r
o
t
a
c
i
d
n
I
D
E
L
s
c
i
n
o
rt
c
e
l
e
e
c
a
l
p
e
R
d
e
r
h
s
a
lf
e
n
O
y
r
e
tt
a
b
e
c
a
l
p
e
R
d
e
r
h
s
a
lf
o
w
T
Four flash red
Replace lamp head board
Steady red
Battery disconnected
Solid green
Trickle charge
Flashing green
In test
Red/Green flashing
Hi charge