See3CAM_CU51
Application User Manual
06-August-2015
www.e-consystems.com
| Subject to change without notice
Page 5 of 21
This document explains the following things.
Selecting the supported preview resolutions.
Selecting the still image resolution.
Capturing still images.
Using supported controls.
Switching between operational modes.
Getting the Unique ID of the camera
5 Pre-Requisites
This section describes the high level instructions to install the See3CAM_CU51 on a PC. Please
refer the Getting Started manual for more detailed installation steps and pictures of the same.
5.1 Installation of the See3CAM_CU51 and Drivers
Follow the following steps to initialize the device with the host computer
Connect the one end of the USB 3.0 cable to the USB 3.0 connector provided at the back
of See3CAM_CU51, and connect the other end to the USB 3.0 host controller on the
computer.
Once connected the LED light on the device will glow indicating that See3CAM_CU51 is
powered up and ready to use.
As See3CAM_CU51 is a generic USB Video Class device windows will automatically
detect all the drivers and it will be installed. This happens for the first time and from the
second time device will be detected immediately by the host PC and will be ready for use.
To see the preview the e-CAMView application designed for See3CAM_CU51 has to be
installed. The installation steps are given in the
section 5.
Installation of e-CAMView
of
the
e-CAMView Installation Manual for See3CAM_CU51_1_2
document.
