See3CAM_130
Getting Started Manual
24-Oct-2016
| Subject to change without notice
Page 9 of 9
Figure 9: Status LED indicating Camera streaming
6.2.4 Ensuring the device connected to Host properly
After the insertion of board to Host, you can confirm that See3CAM_130 is properly connected to
Host from Imaging Devices.
Go to
Control Panel
System and Security
Device Manager
Imaging Devices
See3CAM_130
Figure 10: Imaging Devices showing See3CAM_130 connected to Host
7 Conclusion
This document describes How to connect See3CAM_130 board to USB3.1 GEN_1 Host and how
to get it working.