ACC-CX3RDK-CU5640
Getting Started Manual
28-Apr-2014
www.e-consystems.com
| Subject to change without notice
Page 8 of 9
2. The camera board should be inserted into the Camera header (CN10) of the
DENEBOLA_CX3_RDK Baseboard before powering ON the DENEBOLA_CX3_RDK
Baseboard. Note that the camera board will be positioned inside the board and camera
module will be perpendicular to the camera header. Since the camera board connector is
polarized, you can mount it on only one side as shown in the image.
Figure 5: Camera Header Location
Figure 6: ACC-CX3RDK-CU5640 Board insertion
