E-Collar Einstein ET-1202TS, Руководство пользователя

Страница: 15 / 30

- In 1D Mode, you can change the intensity level of 1D by rotating the
dial and locking it.
(See “LOCK/UNLOCK THE STIMULATION INTENSITY LEVEL” for
details) The intensity level of 2D will be same as that of 1D unless it is
locked.
- In Tapping Sensation Mode, you can send only a tapping sensation
to each collar receiver. We purposely made it easy to switch back and
forth from tapping sensation to stimulation with one button control.
- In 2D Mode, you can change the intensity level of 2D by rotating the
dial and locking it. The intensity level of 1D will be same as that of 2D
unless it is locked.
Momentary/Continuous Button “M/C”
- M/C Button on the backside of the transmitter allows the user to
switch between Momentary Stimulation and Continuous Stimulation.
- If Continuous Stimulation is selected, pressing stimulation buttons
(1D or 2D) will send stimulation to the collar receiver for the duration
of the button being pressed. After 10 seconds the Over-Stimulation
feature will stop the stimulation until the button is released and
pressed again.
Stimulation Button ( 1D )
- In 1D/2D Mode, Sends momentary or continuous stimulation to the
Dog 1 collar receiver based on the state of Momentary/Continuous
Button.
- If Mode Button(M) is pressed while the Stimulation Button(1D) is
pressed, it will send boosting stimulation.
BUTTON FUNCTIONS
14
Einstein Owner's Manual
802TS / 1202TS