STEP 2: (a) Remove the shipping blocks from both rocker side assemblies. (b) Place the front of the seat assembly into the
mortise of one of the rocker side assemblies (use a soft hammer if needed). (c) Fasten the front seat rail to the rocker side
assembly by using 1 – 1 ½” stainless steel pan head screw thru the pocket hole in the front seat rail. (d) Fasten the seat side
support to the rocker side assembly by using 4 – 1 ½” flat head stainless steel screws thru the pre drilled holes in the seat side
support.
(a)
(b)
(c)
(d)
