E.C.A. FELIS FL 100 HM Скачать руководство пользователя страница 6

Страница: 6 / 48

INFORMATION

The appliance should not be used above 2000m altitude above sea level.

Installation

INFORMATION

Com

issioning

Operation and Maintenance

- Please be wary of the warnings in the installation and user manual. That way, any danger caused

by false operation could be prevented.

- For the longevity and high performance of your appliance, maintenance once a year is advised.

Maintenance is under the scope of appliance’s warranty and must be done by the authorized

E.C.A. technical services.

- Outer surfaces of the appliance must be cleaned with a damp cloth without using any chemical

substances. Usage of chemicals like detergents etc. could cause rust and scratches.

Do not install the appliance where it will be affected by direct sunlight. Sun

beams can cause discoloration on the outer surfaces of the appliance.

- Installation of this boiler must be done by a authorized technical service according to the

informa-tion (placement, flue connections etc.) presented on related standards and authorized gas

companies. After the installation, installer must make sure that user has been given the user

manual and give all the necessary information about the boiler and related safety equipments.

- Boiler must be installed in a manner that the appliance should not be in direct contact with water

vapor, detergent vapor or similar chemicals.

- Flue connections must not be tampered with without consulting to the authorized technical

service.

- Siphon included in the appliance package must be mounted to the siphon lid underneath the

appliance.

- First startup of the appliance must be done by the authorized service. Natural gas usage must be

approved by the related gas company prior to the first startup.

- The gas type (natural gas), inlet gas pressure (mbar), maximum water pressure (bar) and

electrical nominal voltage (V) values on the information label must be checked with the local

conditions.

- To prevent the risk of flue gas leakage to the environment, condensing siphon must be filled with

water prior to flue connection.

- After the installation of the appliance, please ask your authorized service personnel to give

information about the operation and safety equipments of the appliance.

- Tightness rubbers (EPDM) on the flue connections must be lubricated prior to the installation.

Grease oil and machine oils shall not be used under any circumstance.

CAUTION:

If the appliance will not be in use until winter season,

water inside the boiler should be drained to prevent freezing.

All data regarding the cascade installation can be seen from the control panel of the master

appliance, therefore slave appliances don’t need to have a separate control panel. LEDs on the

appliances indicate error states and burning statuses. If a single appliance falls into an error state,

error code and the appliance address can be seen from the control panel of the master appliance

and the error can be reset from the button on the aforementioned slave appliance.
To install this appliance in a cascading system, there are suitable cascade accessories available. In

cascade applications, required accessories are subject to change by the requirements of the

actual application. Please contact the manufacturer or your seller for more information.

Содержание FELIS FL 100 HM

















































Результаты поиска

Содержание FELIS FL 100 HM

Отзывы:

Похожие инструкции для FELIS FL 100 HM

Бренды по названию

Популярные бренды

E.C.A. FELIS FL 100 HM, Инструкция по установке и эксплуатации

Результаты поиска

Содержание FELIS FL 100 HM

Отзывы:

Похожие инструкции для FELIS FL 100 HM

Бренды по названию

Популярные бренды