Operation
Comfortable SLEEP
5. When quiet sleeping function is set to 8 hours the quiet
sleeping time can not be adjusted.When TIMER function is
set,the quiet sleeping function can't be set up.After the
sleeping function is set up,if user resets TIMER function, the
sleeping function will be cancelled; the machine will be in the
state of timing-on,if the two
modes are set up at the same
time,
either of their operation time is ended first,the unit will
stop automatically,and the other mode will be cancelled.
Note
When TIMER function is set, the sleeping function can’t be
set up .After the sleeping function is set up
,
if user resets
TIMER function, the sleeping function will be cancelled; the
machine will be in the state of timing-on.
Note to the power failure resume:
Press the sleep button ten times in five seconds and enter
function after hearing four sounds.And press the sleep button
ten times within five seconds and leave this function after
hearing two sounds.
Press
Sleep
button , the remote controller will
show , and then achieve to the
sleep function.
Press again this
be cancelled.
button , the
sleep function will
Sleep
Operation Mode
1. In COOL,DRY mode
1 hours after SLEEP mode starts,temp.will become
1
O
C higher than temp.setting.After another 1 hours,
temp.risesby 1 futhe
O
C
r .The unit will run for further
6 hours then stops Temp. is higher than temp.setting
so that room temperature won’t be too low for your
sleep.
Power Failure Resume Function
SLEEP operation starts
SLEEP operation stops
Approx.6hrs
If the unit is started for the first time, the compressor will not
start running unless 3 minutes have elapsed. When the power
resumes after power failure, the unit will run automatically,
and 3 minutes later the compressor starts running.
1 hr
Rises 1
O
C
1 hr
Rises 1
O
C
Healthy airflow Operation
Temp.setting
Unit stop
In COOL, DRY mode
2.In HEAT mode
1 hours after SLEEP mode starts, temp will become
Press button to enter additional options,Press this
Extra Function
button continuously, the louvers location will cycle between
in the following three locations, to choose the swing location
what you needed,and then press
button to confirm.
O
2 C lower than temp.setting. After another 1 hours,
O
temp decrease by 2 C further. After more another
O
3 hours, temp.risesby 1 C further.The unit will run
for further 3 hours then stops.Temp. is lower than
temp. setting so that room temperature won't be too
high for your sleep.
Confirm/Cancel
Healthy
Healthy
airflow
Present
airflow
upwarder
position
downwarder
3.The cancel of the healthy airflow function
Press button to enter additional options,Press this
Temp.setting
Unit stop
Extra Function
button continuously, the louvers location will cycle between
in the following three locations again,and then press
1 hr
Decreases 2
O
C
Confirm/Cancel
1 hr
Decreases 2
O
C
button to cancel.
Notice: Do not direct the flap by hand. Otherwise, the
grille will run incorrectly. If the grille is not run correctly, stop
for a minute and then start, adjusting by remote
controller.
Note:
1.After setting the healthy airflow function, the position
grill is fixed.
3 hrs
3 hrs
Rises 1
O
C
SLEEP
operation starts
SLEEP
operation stops
In HEAT mode
2.In cooling, it is better to select the
mode.
3.In cooling and dry, using the air conditioner for a long
time under the high air humidity, condensate water may
occur at the grille .
3
1.Press to starting
Setting the comfort work conditions.
2.The setting of healthy airflow function
3.In AUTO mode
The unit operates in corresponding sleep mode
corresponding sleep mode adapted to the
automatically selected operation mode.
4. In FAN mode
It has no SLEEP function.
