e-breathe Multimask M, Инструкция по сборке и монтажу

Страница: 5 / 7

e-breathe Safety • Willicher Damm 99 • 41066 Mönchengladbach • Phone +49 (0) 2161 40290-0 • info@e-breathe.de • www.e-breathe.de
9 8
e-breathe Safety • Willicher Damm 99 • 41066 Mönchengladbach • Phone +49 (0) 2161 40290-0 • info@e-breathe.de • www.e-breathe.de
• Mount the seal in the
middle of the mask
frame marking
• Press the Click seal into mask frame
• Press again all around and check that the seal is seated
• Click the click seal
into mask frame
• Pull out click seal at
the top of the frame
(do not pull on the
foam)
• Pull out the seal at
the bottom of the
frame (do not pull on
the foam)
Assembly: Click face seal 2nd gen.
e-breathe Multimask Pro
Assembly Click face seal 2nd gen.
1 2
3
Disassembly: Click face seal 2nd gen.
4
• Example: Multimask frame and click seal removed
5 6
Mounting: headband
• Insert eccentric buckles L+R into the mask
frame
• Pay attention to L / R marking on the buckles
and on the mask frame
1
• Turn eccentric bu-
ckles L+R counterc-
lockwise by 180
2 3
• Example of correctly
mounted headband
e-breathe Multimask Pro
Mounting headband
Disassembly: Headband
• Turn eccentric buckles L+R by 180° clockwise
4 5
• Pull the eccentric buckles L+R out of the mask
frame
6
• Example dismantled
headband