- 11 -
Video Setup Page
Component
Select the appropriate video output for your connection type.
· YUV:
Choose this setting if your DVD player is connected to a TV with YUV video cables.
· S-Video:
Choose this setting if your DVD player is connected to a TV with S-VIDEO cable.
· RGB:
Set the video output to SCART output. If you select SCART connection, you
should set up the play mode as RGB state, then it will output normally.
TV Mode
Select progressive-scan or interlaced video mode for your TV's signal output.
· Interlace:
Conventional (analog) televisions
· P-scan:
TVs supporting progressive scan signal inputs. Do not select this option lightly, as most TVs do not
support progressive scan video and you will be left with a blank screen.
Sharpness / Brightness / Contrast
Sets the sharpness / brightness / contrast level of image.