E-Blox
®
Circuit Builder
TM
parts contain a PC board with
connectors so you can build the different electrical and
electronic circuits in the projects. Each block has a
function: there are switch blocks, a light block, battery
block, wire blocks, etc. These blocks are different colors
and have numbers on them so that you can easily identify
them.
For Example:
This is the press switch, it is green and has the marking
61 on it. The part symbols in this booklet may not exactly
match the appearance of the actual parts, but will clearly
identify them.
This is a wire block which comes in a single length. The
part has the number 4 on it.
You need a power source to build each
circuit. The part is marked 91 and
requires three (3) 1.5V “AA” batteries
(not included). The four connections are
marked −, 1.5V, 3V, and 4.5V.
A short circuit indicator LED lights if any
of the outputs are shorted or under a
high current draw.
Only use the battery holder when the cover is securely in place.
Included is a special plated wire 1 block which allows you
to connect to other E-Blox
®
series (see last page).
A large clear plastic base grid is included with this kit to
help keep the circuit blocks properly spaced. You will see
evenly spaced posts that the different blocks plug into.
Next to the assemble drawing may be a part with an
arrow and red circle as shown below. This indicates that
the part is installed below other parts and which level it
is on.
How to Use Your E-Blox
®
Circuit Builder
TM
Set
2nd level
-9-
EBX59_Manual_051717_Layout 2 5/17/2017 11:09 AM Page 10
