9. Press Switch-controlled Flying Saucer
First, take off the cap (59) that is on the fan blade (60). Build the
circuit, then hold the press switch (61) until the motor (95) runs fast,
then release the press switch (61) and you will see the flying saucer
take off. (
Caution!
Never let it fly near your face!)
-21-
10. Switch-controlled Flying Saucer
Replace the press switch (61) with the switch (62), put on the fan blade (60), then press the switch
(62). Wait for the motor (95) to run fast. Press the switch (62) again, the flying saucer will take off.
11. Magnet-controlled Flying Saucer
Replace the press switch (61) with the reed switch (83), move the magnet (7) towards the reed switch (83).
Wait for the motor (95) to start running. Move the magnet (7) away, then the flying saucer will take off.
Reminder: Remove
the shaft cap before
using
the
flying
saucer.
1st level
!
WARNING:
Moving parts.
Do not touch the fan or
motor during operation. Do
not lean over the motor.
E-BLOX_2X_Model_115_042517 5/17/2017 10:58 AM Page 22
