E-Bike CITY BIKE, Оригинальное руководство по эксплуатации

Страница: 85 / 112

Controlling the auxiliary drive
83
Making advanced settings
To make advanced settings, proceed as follows:

Press POWER until the display turns on.

Press PLUS and MINUS for about three seconds at the same time.
Settings mode will be displayed.

Press PLUS and MINUS at the same time and hold them down.

Press POWER eight times at the same time.
The advanced settings menu will be displayed.
You can make the following advanced settings:

tyre diameter

time for automatic switching off of the display when not in use

power level setting.
Setting the tyre diameter
To set the tyre diameter, proceed as follows:

Set the existing tyre diameter with PLUS and MINUS.

Press POWER.
You can now set the automatic display switch-off.
Setting the automatic display switch-off
To set the time for automatically turning off the display when not in use,
proceed as follows:
You can set a time that is between 0 and 360 minutes.

Set the desired time for the automatic switch-off with PLUS and
MINUS.

Press POWER
.
You can now set the number of power levels.