manualshive.com logo in svg

E-Bike 36V, Руководство пользователя

Поделиться
Скачать
E-Bike 36V Скачать руководство пользователя страница 44

41

Push the valve stem into the tire to make sure that its base is
seated within the tire's beads. Inflate the tube slowly to the
recommended pressure, all the while checking to make sure
that the tire beads stay seated in the rim. Replace the valve
cap, and install the wheel onto the E-Bike™.

WARNING:
Riding your E-Bike™ with a flat or under-inflated tire can
seriously damage the tire, tube and E-Bike™, and can cause
you to lose control and fall.

Broken Spoke
A wheel with a loose or broken spoke is much weaker than a
fully tensioned wheel. If you break a spoke while on a ride,
you will have to ride home much more slowly and carefully
because the weakened wheel could break additional spokes
and become useless.

WARNING:
A broken spoke seriously weakens the wheel and may cause
it to wobble, striking the brakes or the frame. Riding with a
broken spoke can cause you to lose control and fall.

Twist the broken spoke around the spoke next to it to keep it
from flopping around and getting caught between the wheel
and the frame. Spin the wheel to see if the rim clears the
brake pads. If the wheel will not turn because it is rubbing

against a brake pad, try turning the brake cable adjusting
barrel(s) clockwise to slacken the cable and open up the
brakes. If the wheel still won't turn, open the brake's quick
release and secure any loose cable as best you can. Walk the
E-Bike™, or if you must, ride it with extreme caution,
because you now have only one working brake.

If You  Crash

WARNING:
A crash can put extraordinary stress on E-Bike™
components, causing them to fatigue prematurely.
Components suffering from stress fatigue can fail suddenly
and catastrophically, causing loss of control, serious injury or
death.

First, check yourself for injuries, and take care of them as
best you can. Seek medical help if necessary. Next, check
your E-Bike™ for damage, and fix what you can. When you
get home, carefully perform the checks described in Chapter
Three, and check for any other damaged parts. All bent,
scored or discolored parts are suspect and should be
replaced.

CAUTION:
If you have any doubt about the condition of the E-Bike™ or
any of its parts, take it to your dealer for a thorough check.

Содержание 36V


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды