E-Bike 36V, Руководство пользователя

Страница: 15 / 49

12
9. Reinstall the battery pack, and close the retainer gate.
10. Close latch by lifting the latch ring with your left hand and
locating it on to the frame hook with your right hand.
11. Close the battery compartment door and turn latches
counterclockwise.
CARE AND CLEANING
Remove the battery pack before washing your E-Bike™.
WARNING:
Keep the battery pack and charger away from water to
prevent electrical shock and damage to the charger or
batteries.
Clean the E-Bike™ with a mild soap and a sponge. DO NOT
use a power hose or washer. Gently rinse with water. Avoid
spraying water directly onto the control switches, motor and
front hub bearings. Do not spray water inside the battery
compartment. Dry the frame mounted electrical connector in
the battery compartment before reinstalling the battery pack.
Use automotive wax to protect painted surfaces. Lubricate
the chain periodically to help prevent corrosion and minimize
wear.
3. FIT AND SAFETY
FIT
Make sure the E-Bike™ fits. A bike that is too big or too small
for the rider is harder to control and can be uncomfortable.
WARNING:
If your E-Bike™ does not fit properly, you may lose control
and fall. If your new E-Bike™ does not fit, ask your dealer to
exchange it before you ride it.
Standover Height
The first check for correct size is standover height. Standover
height is the distance from the ground to the top of the top
tube at that point where your crotch would be if you were
straddling the E-Bike™ by standing half way between the
saddle and the handlebar stem.
FIG. 5