Dynon Avionics SkyView HDX, Дополнение к руководству по летной эксплуатации самолета

Страница: 56 / 88

Page | 7-20
SkyView
Airplane Flight Manual Supplement, Rev N,
10/23/2020
7.9 Indications
Airspeed Indicators
Installation of SkyView HDX does not necessitate changes to airplane's airspeed limitations.
Refer to the Aircraft Limitations in the airplane's Aircraft Flight Manual (AFM) for the airspeed
limitations. Configuration values for airspeed markings are entered into SkyView HDX during
initial system setup.
The following airspeed indicator provides 14 CFR 23.1545 compliant airspeed markings for
vertical tape-style displays:
•
RED BAND: Indicates speeds at and above the never exceed speed (V
NE
).
•
RED LINE: Indicates minimum control speed (V
MC
)
– twin-engine airplanes.
•
YELLOW BAND: Indicates the range of speeds below the never exceed speed (V
NE
),
and above the maximum normal operations speed (V
NO
).
•
GREEN BAND: Indicates the range of speeds at or below the maximum normal
operations speed (V
NO
), and above the flaps up stall speed (V
S1
).
•
WHITE BAND: Indicates the range of speeds above the minimum flight speed in landing
configuration (V
S0
) and below the maximum flaps extended speed (V
FE
).
•
CYAN LINE: Indicates best rate of climb with a single engine (V
YSE
)
– twin-engine
airplanes.
Other, optional indications can include:
•
WHITE X: Indicates best angle of climb (V
X
).
•
WHITE Y: Indicates best rate of climb (V
Y
).
•
WHITE A: Indicates maneuvering speed (V
A
).
Reference Figure 8 for an example of airspeed markings typical across the airspeed range.