IFC17019.01 www.powercommander.com
2008-2014 Kawasaki Brute Force 750 - 5
3
Using the supplied velcro, secure the PCFC to the tray under the seat as
shown in Figure G.
Make sure to clean both surfaces with the alcohol swab before attaching.
FIG.G
4
Route the PCFC harness under the plastic tray and down the right hand side
of the ATV, following the stock wiring harness as shown in Figure H.
This wire routing will be much easier with the clutch snorkel and the two bolts
at the front of the tray under the seat removed.
5
Locate the 6-pin BLACK connector on the front head, that comes from the
throttle bodies as shown in Figure I.
This connector is behind the coolant hose as shown in Figure I.
6
Unplug this connector.
FIG.H
FIG.I
