IFC17019.01 www.powercommander.com
2008-2014 Kawasaki Brute Force 750 - 2
SELECTING THE MAP POSITION
The Dynojet Power Commander Fuel Controller (PCFC) comes loaded with up to ten
maps. Using a #1 Phillips screwdriver, turn the map select dial to toggle between the
loaded maps. Refer to the map position table for the maps included in your PCFC.
USING THE RPM RANGE DIALS
The Low, Mid, and High RPM Dials refer to the RPM range, in thirds, of your vehicle.
Each dial /- 10% fuel adjustment on top of what fuel changes are done in the
map. With the dial facing straight up, there is no additional fuel change.
For example, if your vehicle revs to 6000 RPM:
• The low RPM dial will adjust 0-2000 RPM
• The mid RPM dial will adjust 2001-4000 RPM
• The high RPM dial will adjust 4001-6000 RPM
USING PCFC CONTROL CENTER
Take your tuning to the next level with the PCFC Control Center software.
1
Using your web browser, navigate to www.powercommander.com.
2
Click Enter Race Ready.
3 Click
Downloads.
4
Click Access Downloads for Power Commander FC.
5
Click the PCFC software Download button.
6
Open the zip folder.
7
Double-click the install file and follow the on-screen instructions to install the PCFC
Control Center software. The PCFC Control Center software and maps will be
stored in C:\Program Files\PCFC Control Center.
8
Return to the Downloads or Home page where you can enter the make, model, and
year of your bike to check for and download additional maps.
LOADING ADDITIONAL MAPS
1
Connect the USB cable from the computer to the PCFC. Verify the cable is fully
seated in the PCFC.
2
Run the Control Center software by double-clicking the program icon installed on
your desktop or on your start menu.
3
Click Open Map File and select a map file.
4
Click Send Map. You can send the map to any of the ten map positions.
ALTERING MAPS USING SOFTWARE
The values in the map represent a percentage of fuel change over stock. A value of 10 in
the map indicates at that throttle position and RPM range the vehicle will be 10% richer
than stock. If the value is -10, then it would be 10% leaner than stock. You have the
ability to fine tune your fuel curve by altering these values. The Control Center software
allows a value of +250 to -100 in each cell.
USB Port
HIGH RPM Dial
MID RPM Dial
LOW RPM Dial
MAP Select
STATUS Light
Position
Note
Position 1
2008-2011 Kawasaki Brute Force 750
Stock exhaust
Stock air filter
Position 2
2012-2014 Kawasaki Brute Force 750
Stock exhaust
Stock air filter
