manualshive.com logo in svg

Dynisco LMI5000, Руководство по эксплуатации

Поделиться
Скачать
Dynisco LMI5000 Скачать руководство пользователя страница 36

From lab to production,  
providing a window into the process 

-37-

Loading and Packing Material into the Barrel

 

The piston rod should be inserted into the barrel during heating and temperature stabilization 
and between tests. Remove the piston rod and lay on a cotton cloth. Check to see if the die is at 
the bottom of the barrel. Fill heat chamber/barrel with an appropriate charge or use about 5 
grams if nothing is known about the material. Put the sample into a small beaker. Add about 
two-thirds of the material into the barrel, using a fill funnel. The loading should be done in two 
increments, the first consisting of approximately two-thirds of the material. Tamp down the 
material with the packing tool using approximately 20 pounds/9Kg of force. The packing tool can 
be driven through the fill funnel. If bridging (clogging) of the material occurs in the fill funnel, 
slide the fill funnel off to one side (without lifting) and use the fill tool to pack the material in the 
barrel directly. Move the fill funnel back into place. The remaining material should drop down 
into the barrel. Repeat with the remainder of the material.  

The Packer Option, if purchased, can be used to tamp down the material. Packer air pressure is 
set, depending on material, to achieve the desired packing force. The packer must be enabled, 
through the System Configuration screen. Material is loaded, as stated above, with a funnel. 
The funnel is removed. The packer is pivoted around and held above the barrel. The packer’s 
push button is pressed to extend the packer rod down into barrel. The packer’s push button is 
released. The packer rod is released and the entire packer assembly will pivot back to its 
starting position. If a lift option is also installed, the lift will not lower if the packer is not back in 
its starting position.  

Bubbles are present in the test sample charge if a snapping/popping sound is heard as the 
extrudate is forced through the orifice. If bubbles appear in the extrudate, use less material 
between tamping down. If bubbles continue, the sample may not be sufficiently dry.  

Place the piston rod into the barrel by placing the piston rod directly over the slot/opening on the 
top of the indexer barrel cover. Seat the guide bushing down into the barrel if it has not already 
fallen into place. The guide bushing should be moving freely on the piston plunger. Place the 
desired test weight on the piston plunger rod.  

The lift option can be used to lower weight onto the piston. The lift must be enabled, through the 
System Configuration screen. On the test setup screen, Auto raise, Auto lower and Auto Hold 
can be enabled and used for weight sequencing

. 

P/N:  M0726(3) 

 |   Rev: 012020   | ECO: 51182

www.dynisco.com 

Содержание LMI5000






















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды