Dynex DX-M102, Руководство пользователя

Страница: 3 / 16

Installing the modem driver
3
After your computer starts, you must install the driver. See the section
“Installing the modem driver” on page 3.
Installing the modem driver
(Windows Vista/Windows XP/Windows 2000)
Note: Your computer may differ slightly from these images.
To install the modem driver:
1 When your computer starts, the Found New Hardware Wizard
opens automatically (this may not appear on Vista systems;
continue to step 3).
2 Click Cancel .
3 Insert the DX-M102 CD into your CD or DVD drive. The Dynex PCI
Modem window opens automatically.
4 Click Install Driver .
5 The driver is installed.
6 Click OK , then EXIT to close the Dynex PCI Modem window.
Troubleshooting
For troubleshooting information, see your user guide located on the
Dynex CD.
To verify the installation is correct
1 Open the Windows Control Panel and double click the Phone and
Modem Options icon. You may need to switch to Classic View.
2 Click the Modems tab, then select Dynex DX-M102 SM56kb
Data Fax Modem and click Properties .
3 Click the Diagnostics tab.
4 Click Query Modem .
5 Within a few seconds a window will appear with the modem
responses to various AT commands issued to it. When this
happens, the modem software is properly installed and
functioning correctly.