Dynex DX-CRDRD, Руководство пользователя

Страница: 4 / 20

4
DX-CRDRD
Package contents
• Card reader with USB 5-pin cable
• Mounting screws (ISO 3f 4mm) (4)
• Extra front bezel (1)
• Utility CD (includes AP drivers and this
User Guide )
• Quick Setup Guide
Minimum system requirements
• IBM-compatible PC
• Pentium 133 MHz or higher processor
• CD drive
• 2 MB of hard drive space
• One available on-board 5-pin USB connector on the computer's system board
• One available 3.5-inch drive bay
• Windows® 2000, Windows® XP, Windows® Vista, or Windows® 7
Installing the card reader
Caution
: Electrostatic discharge (static electricity) can damage electronic components. Make
sure that you are grounded before you install your card reader. Turn off your computer,
then touch a bare metal part of your computer, such as the back of the chassis or power
supply, to discharge any static electricity.
To install your card reader:
1 Turn off your computer and disconnect the power cord.
2 Open your computer's cover. For more information, see the documentation that came
with your computer.
DX-CRDRD_10-0881 EN.fm Page 4 Tuesday, August 31, 2010 4:02 PM