Internal All-in-One Card Reader/Writer
5
3
If you want the alternate colored bezel, change it now by pressing the plastic clips on
each side of the card reader with a pen or pencil and pulling the bezel off, then
snapping the new bezel into place.
4
Locate a USB connector on the motherboard and make sure the connector is
compatible with your card reader’s USB connector.
5
Carefully slide your card reader into the empty
3.5" drive bay.
6
Secure your card reader to the drive bay with the four mounting screws (two screws
per side).
Pin
Wire color Function
P5
No contact
No contact
P4
Black/shield
Ground
P3
Green
D+
P2
White
D-
P1
Red
Vbus
Push in
plastic clips
Screw
Screw
DX-CRDRD_10-0881 EN.fm Page 5 Tuesday, August 31, 2010 4:02 PM
Содержание DX-CRDRD
Страница 14: ...14 DX CRDRD DX CRDRD_10 0881 EN fm Page 14 Tuesday August 31 2010 4 02 PM ...
Страница 17: ...Internal All in One Card Reader Writer 17 DX CRDRD_10 0881 EN fm Page 17 Tuesday August 31 2010 4 02 PM ...
Страница 18: ...18 DX CRDRD DX CRDRD_10 0881 EN fm Page 18 Tuesday August 31 2010 4 02 PM ...
Страница 19: ...Internal All in One Card Reader Writer 19 DX CRDRD_10 0881 EN fm Page 19 Tuesday August 31 2010 4 02 PM ...