6
DX-CR212
To access a media card using Macintosh OS 10.4.x or higher:
1
Plug the USB cable into an open USB port on your Mac.
2
Insert a card into the appropriate slot, as shown in the table on page 4. A new drive
appears on the desktop.
Caution:
Cards must be inserted into the correct slot and in the correct direction, otherwise
you may damage the card and/or the slot. Cards inserted into the microSD and MS are
inserted label side UP. Cards inserted into the SD slot must be label side DOWN.
3
Double-click the new memory card icon. Use normal Mac procedures for opening,
copying, pasting, or deleting files and folders.
To remove a memory card using Macintosh:
1
When you have finished working with the files on the memory card, drag the memory
card icon to the
Eject
icon or click the memory card icon on the desktop and select
Eject
.
2
Carefully remove the memory card.
Caution:
Do not insert or remove memory cards while the blue data LED on the reader is
flashing. Doing so may cause damage to your card or loss of data.
Data LED
Indicates when a slot is reading from or writing to a card.
• LED off–Your card reader is not being used
• LED on–A card is inserted in one of the slots
• LED flashing–Data is being transferred to or from a card and the hard drive, or another
card
Formatting a memory card (Windows)
Caution:
Formatting a memory card permanently deletes all files on the card. Be sure that
you copy any valued files to a computer before formatting a memory card. Do not
disconnect the card reader or remove the memory card while formatting is in progress.
If your computer has trouble recognizing a new memory card, format the memory card in
your device (refer to the documentation that came with the device) or by using the following
procedure.
To format a memory card:
1
Click
Start
, then click
My Computer
or
Computer
.
2
Right-click the appropriate memory card drive.
3
Select
Format
.
4
Type a name into the
Volume Label
box. The name of your memory card appears
next to the icon.
5
Click
Start
, then click
OK
in the
Warning
dialog box.
6
Click
OK
on the
Format Complete
window.
7
Click
Close
to finish.
DX-CR212_12-0057_MAN_V2_EN.fm Page 6 Wednesday, April 4, 2012 1:04 PM
