Dynex 50" LED TV
55
DX-50D510NA15
www.dynexproducts.com
Changing channel settings
Automatically scanning for channels
When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press
CH+
or
CH–
, your TV goes to the next or previous channel in the
channel list.
If the TV signal source changes, for example you change
from an outdoor antenna to cable TV (no box), you need
to scan for channels.
1
Press
MENU
. The on-screen menu opens.
2
Press or to highlight
Channels
, then press or
ENTER
. The
Channels
menu opens.
3
Press or to highlight
Auto Channel Scan
, then
press
ENTER
. The
Choose Your TV Source
screen
opens.
4
Press or to highlight
Antenna
,
Cable
, or
Cable/Satellite Box
, then press
ENTER
.
• If you are using an antenna for a standard or HD TV
signal, select
Antenna
. Your TV scans for available
channels. The scan may take several minutes.
During scanning your TV searches for digital
channels first. When the digital channel search is
complete, a message appears asking if you want to
search for analog channels. Select
Yes
to continue
searching for analog channels, or select
No
to stop
searching for channels.
• If your cable is connected directly to the TV
(without a box), select
Cable
. Your TV scans for
available channels. The scan may take several
minutes.
• If your cable or satellite TV is connected to your TV
through a box, select
Cable/Satellite Box
. Your TV
does not need to scan for channels. A message
tells you to select the correct input source. Press
INPUT
, press or to highlight the video input
you connected your TV to, then press
ENTER
.
Note
You can press
EXIT
to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
