16
Dynex 50" LED TV
DX-50D510NA15
www.dynexproducts.com
Coaxial (good)
1
Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2
Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3
Connect a coaxial cable (not provided) to the
ANT/CABLE
jack on the back of your TV and to the antenna or cable TV
wall jack.
4
Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5
Press
INPUT
to open the
INPUT SOURCE
list.
6
Press or to highlight
TV
, then press
ENTER
.
7
If you cannot tune to channels you know exist, scan for channels. See “
Automatically scanning for channels
” on page
Notes
• Use a coaxial cable to eliminate interference and noise from
radio waves.
• Do not bundle the coaxial cable with the power cord or other
cables.
Cable or
satellite box
Coaxial cable
Back of TV
Coaxial cable
connector
ANT/CABLE
jack
On your TV