Making connections
11
DX-24LD230A12
Connecting an antenna or cable TV (no
box)
To connect an antenna or cable TV (no box):
1
Turn off your TV/DVD combo and all connected
equipment.
2
Connect a coaxial cable to the
ANT/CABLE IN
jack
on the back of your TV/DVD combo and to the
antenna or cable TV wall jack.
3
Turn on your TV/DVD combo, then go through the
setup wizard described on page 16.
Connecting an HDMI or DVI device
To connect an HDMI or DVI device:
1
Make sure that your TV/DVD combo’s power cord is
unplugged and the HDMI or DVI device is turned off.
2
Connect an HDMI cable (not provided) to the
HDMI1
or
HDMI2
jack on the back of your TV/DVD combo
and to the
HDMI OUT
jack on the HDMI or DVI
device.
3
If you are connecting a DVI device, connect an audio
cable with stereo mini plug (not provided) to the
PC/DVI AUDIO IN
jack on the back of your TV/DVD
combo and to the
AUDIO OUT
jack on the DVI
device.
4
Reconnect the power cord to your TV/DVD combo.
To play from an HDMI or DVI device:
1
Turn on your TV/DVD combo, then press
INPUT
to
open the
INPUT SOURCE
list.
2
Press
INPUT
repeatedly, or press
or
to select
HDMI 1
or
HDMI 2
, then press
ENTER
/
.
3
Turn on the HDMI or DVI device.
Notes
•
Use a coaxial cable to eliminate interference and
noise from radio waves.
•
Do not bundle the coaxial cable with the power
cord or other cables.
•
If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
P
B
P
R
Back of TV/DVD combo
Co
ax
ia
l c
ab
le
Note
A DVI device can only be connected to the
HDMI1
jack. If you connect a DVI device to the
HDMI2
jack,
you will not hear sound.
P
B
P
R
Back of TV/DVD combo
HDMI or DVI device
HDMI cable
DX-24LD230A12.book Page 11 Friday, April 8, 2011 2:05 PM