Using the remote control
15
DX-19LD150A11
Connecting a basic home theater system
Using digital audio
To connect a basic home theater system using digital
audio:
1
Make sure that your TV/DVD combo’s power cord is
unplugged and the home theater system is turned
off.
2
Connect a digital optical audio cable (not provided)
to
SPDIF OUT
jack on the back of your TV/DVD
combo and to the digital optical audio jack on the
digital home theater system.
3
Reconnect the power cord to your TV/DVD combo.
Using analog audio
To connect a basic home theater system using analog
audio:
1
Make sure that your TV/DVD combo’s power cord is
unplugged and the home system is turned off.
2
Connect an audio cable (not provided) to the
OUT
/
L
,
R
(audio out) jacks on the back of your TV/DVD
combo and to the
AUDIO IN
jacks on the home
theater system.
3
Reconnect the power cord to your TV/DVD combo.
Using the remote control
Installing remote control batteries
To install the remote control batteries:
1
While pressing the cover release latch on the back of
the remote control, lift the cover off the remote
control.
2
Insert two AAA batteries into the battery
compartment. Make sure that you match the + and –
symbols on the batteries with the + and – symbols in
the battery compartment.
3
Replace the battery cover.
Aiming the remote control
To aim the remote control:
1
Point the remote control towards the remote sensor
on the front of your TV/DVD combo.
Note
To play audio from the external audio system, make
sure that the
Speakers
option on the
Advanced
Audio
sub-menu is set to
External
. For more
information, see “Adjusting the sound settings” on
page 23.
P
B
P
R
Back of TV/DVD combo
Home theater system
Di
gi
ta
l a
udi
o
ca
bl
e
P
B
P
R
Back of TV/DVD combo
Home theater system
An
al
og
audio
cabl
e
Cautions
•
Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
•
Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
•
Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
•
Do not mix batteries of different types.
•
Do not mix old and new batteries.
•
Remove batteries when the charge is depleted.
•
If the remote control is not going to be used for
an extended period of time, remove the
batteries.
DX-19LD150A11_11-0915_MAN_ENG_V4.book Page 15 Monday, August 29, 2011 8:29 AM