POWERCUBE User Manual
8
Figure2-2 The sketch of interface.
Table 2-4
Interface Definition
Item
Name
Definition
1
Power switch
OFF/ON, remains ‘ON when using
2
Positive socket
Battery output or parallel positive line
3
ADD
DIP switch
4
SW (battery
wake/sleep
Switch)
When power switch is in ‘ON’, long pressing SW for 3s to enable
the battery for switch-on ,then switch on the DC breaker between
the battery with inverter.If you need to shut down the system,firstly
swich off the DC breaker between the battery with the inverter,
then press SW for 3s and switch the power button to “OFF”.
5
SOC
Green light, showing battery capacity
6
ALM
Red lights, flash when warming, always on when
Protection. When the condition of triggering protection is
removed, the battery can recover automatically
7
RUN
Green light, flashing when standby, always on when discharge,
flash when charging
8
CAN/485
Communication Port
Communication (factory default CAN communication)
9
DRY CONTACT
/
10
Negative socket
Battery output or parallel negative line
11
Grounding
Shell ground connection
12
COM
Communication cascade port, support RS232
