12
ASSEMBLY
Remove the attachment from the power
unit before making any assembly, adjustments or
changing add
-
ons.
Such preventive safety measures reduce
the risk of starting the power unit accidentally.
Attaching/removing the attachment (Fig. 2)
•
Open the chuck
(6)
on the power unit. The chuck must fit
a Ø10mm shank diameter.
•
Insert the shank
(4)
into the chuck, and tighten the chuck
properly.
•
To remove the attachment, untighten the chuck and
remove the attachment.
Do not use the power of the power unit
while grasping chuck to loosen or tighten shank.
Friction
burn or hand injury is possible if attempting to grasp the
spinning chuck.
Assembly and changing of add
-
ons
Please observe Assembly Guide included with your add
-
on.
ENGLISH
(ORIGINAL INSTRUCTIONS)
! WARNING
! WARNING
FIG. 2
6
4
NB!
Power unit is not included with attachment
unless otherwise specified.
