DYNAWATT 4000, Руководство пользователя

Страница: 8 / 26

Introduction
MANUAL CONTENT
This manual covers: Operating Instructions, Installation Guidelines and Installation Instructions.
SYSTEM DESCRIPTION
Generator and Control Unit
The system consists of a high performance generator which is belt-driven by the main engine
and controlled by the control unit. Whenever the engine is on, a precisely controlled 230V
power source with 50 Hz sine wave AC is available. Once the system is installed, the operation
of the system is automatic, including automatic shutdown if an overload or short circuit occurs.
Remote Control
The remote control provides a POWER ON and STANDBY OFF switch and has 4 LED status
and fault indicators.
Power Transfer Switch
A Power Transfer Switch is required for switching between an external power source (230V
mains) and the DYNAWATT Power System.
WARNING
Voltage must never be connected to the control unit! Return voltage
will immediately result in the control unit being damaged!!
NO WARRANTY
8