background image

 

7

Introduction

Dear music lover

Welcome to your new Dynaudio 

subwoofer.

We’ve been designing, engineering and 

creating speakers at our Denmark 

headquarters since 1977, and ever since 

we started we’ve been pouring advanced 

R&D technology into every model. 

What comes out is audio reproduction at 

the highest level, making listening to 

even the most familiar recordings a new 

listening experience altogether. Our aim: 

to reproduce exactly what was 

happening in the studio at the time of the 

original recording.

In fact, we’re one of very few companies 

who can realize such concepts. That’s 

thanks to Dynaudio Labs, our in-house 

development and production facility. 

It’s so advanced, in fact, that we’ve been 

given TS16949 certification.

Each loudspeaker is constructed and 

rigorously tested by our master-

craftsmen to these incredibly demanding 

standards.

If you want to get the best possible 

performance from them (that’s why you 

bought Dynaudio in the first place, after 

all), take a look at the information on the 

following pages. By considering our tips 

and suggestions, you’ll be recreating 

what our engineers do in our testing 

rooms: extracting every ounce of detail 

and nuance in the music… and then 

enjoying every second of it.

We wish you many years of enjoyment 

with your new subwoofer.

Dynaudio

Содержание Sub 3















































Отзывы: