Dynaudio Focus, Руководство пользователя

Страница: 33 / 36

Connection Modes, Resets and
Updates
You may need to set your Dynaudio Focus speakers to connection or pairing mode, or to reset them. You can use
both the remote control and the Dynaudio Set-up and Control app to activate these features.
Note
For the speaker rear panel buttons referred to in the following paragraphs, see “Switching On and Connecting
Your Focus Speakers”.
Connecting Your Speakers to a Different Wi-Fi Network
1. Press and hold the Wi-Fi button (A-3) on the rear panel of the Primary speaker for three seconds to instigate Wi-Fi
connection mode.
2. Open the Dynaudio Set-up and Control app on a device connected to the desired Wi-Fi network.
3. Tap the “…“ icon on the app Home screen to initiate the “Add new speaker” procedure.
Using Apple AirPlay or Google Home for Setup
In addition to connecting your Focus speakers to your Wi-Fi network using the Dynaudio Set-up and Control app,
it is also possible to manage the connection process using either
▪
AirPlay setup on iOS devices or
▪
the Google Home app on Android or iOS devices.
Deleting the Entire Speaker Bluetooth Paired Device Memory
1. Press and hold the Primary speaker rear panel Bluetooth button (A-2) for ten seconds.
Note
If you only need to edit the paired device memory, this can be done via the Set-up and Control app Settings
menu.
Re-Establishing a Wireless Connection Between the Primary and
Client Speakers
1. With both speakers switched on, press and hold the Speaker Pairing button (B-1) on the rear panel of the Client speaker
for three seconds.
2. If connection fails, press and hold the Speaker Pairing button on the rear panel of the Primary speaker (A-1) for three
seconds.
3. If the wireless inter-speaker connection still fails, switch both speakers off and back on again (A-8 and B-8).
Substituting the Existing Client Speaker With a Replacement
1. With both speakers switched on (A-8 and B-8), press and hold the Speaker Pairing button (A-1) on the rear panel of the
Primary speaker for three seconds.
2. If the wireless inter-speaker connection still fails, switch both speakers off and back on again.
Resetting Your Focus Speakers to Their Factory Default State
1. Press and hold the Speaker Pairing and Wi-Fi buttons (A-1 and A-3) on the rear panel of the Primary speaker
simultaneously for ten seconds.
As the Primary speaker restarts, it will automatically connect to the Client speaker and then enter Wi-Fi connection mode.
Connection Modes, Resets and Updates 33