Dynaudio Focus, Руководство пользователя

Страница: 11 / 36

Illustration: Speaker at head height
▪
Shelves and furniture units should be easily able to support the weight of the speakers and be both rigid and non-
resonant. Shelves attached to stud-work and plasterboard walls are unlikely to provide adequate strength or rigidity. If
you’re unsure of your wall’s suitability, or of your ability to install shelf hardware, check with a qualified professional.
▪
Furniture that incorporates large unsupported panels might not be suitable for speaker mounting as the vibrations from the
speakers can cause sympathetic panel vibrations.
Similarly, locating speakers within furniture alcoves can result in a resonant air volume around and behind the speaker that
could colour the sound.
Using Speakers Stands
We recommend the use of the Dynaudio Stand 20 with your Focus 10 speakers. Similarly dimensioned stands
from alternative manufacturers may be used.
▪
If you are to use Dynaudio speaker stands with your Focus 10 speakers, please follow the assembly instructions supplied
with the speaker stands.
If you have lost the instructions, you can download them from the
support section of the Dynaudio website . Instructions
for using the feet supplied with the stands are also available.
If you intend to use speaker stands from an alternative manufacturer, please follow the assembly instructions
supplied with them.
We always recommend that speakers mounted on stands are fixed to the stand-top plates by screws. Speakers
mounted on stands without top-plate fixings can fall, which may result in damage or injury.
Installing Your Focus 30 and Focus 50 Speakers
Focus 30 and Focus 50 speakers are supplied with foot components that require fitting to the underside of the
Installing and Positioning Your Focus Speakers 11