Dynaudio BM14S II, Руководство пользователя

Страница: 7 / 20

Before operation
Owner’s manual 5
Controls and connections
4. Getting started
Dynaudio Acoustics BM14S 5
Controls and connections
1 AC IN
Mains power input.
2 POWER ON (Main)
Main power switch (to switch the subwoofer manually on and off).
LED shows operation mode:
• red : subwoofer switched on and in mute mode
• green : subwoofer is activated
3 Power (Mode)
• On : subwoofer is permanently on
• Auto : subwoofer switches on when signal is detected
4 Gain
Subwoofer volume level.
5 Lowpass
Subwoofer lowpass frequency: continuously variable from 50 to 150 Hz.
6 Phase
Phase setting: phase can be set to 0° or 180°.
7 Mode
Subwoofer operation mode LFE or Slave :
• LFE : setting for normal use and Master use
• Slave : setting for second and all following subwoofers
8 Highpass
Allows cutting off low frequencies of the signal provided at the
SAT/SUB
output:
• Flat : signal is not processed
• 60 : cut-off frequency at 60 Hz
• 80 : cut-off frequency at 80 Hz
9 SAT/SUB (output)
Output for satellite system to be connected. This signal is processed according to
the Highpass setting.
10 SAT/SUB (input)
Input for full bandwidth signal. This signal will be processed according to the
Highpass setting and provided at the SAT/SUB output.
11 LFE
• LFE/Slave : input for LFE signal
• Slave : output to next subwoofer if installed
Terminal pinout (sockets 9, 10 and 11)
1 = 0 2 = + 3 = –
1 2
3
4
5
6
7
8
9
10
9
10
11
(1) AC IN
Mains power input.
(2) POWER ON (Main)
Main power switch (to switch the subwoofer manually on and
off). LED shows operation mode:
– red: subwoofer switched on and in mute mode
– green: subwoofer is activated
(3) Power (Mode)
– On: subwoofer is permanently on
– Auto: subwoofer switches on when signal is detected
(4) Gain
Subwoofer volume level.
(5) Lowpass
Subwoofer lowpass frequency: continuously variable from 50
to 150 Hz.
(6) Phase
Phase setting: phase can be set to 0° or 180°.
(7) Mode
Subwoofer operation mode LFE or Slave:
– LFE: setting for normal use and Master use
– Slave: setting for second and all following subwoofers
(8) Highpass
Allows cutting off low frequencies of the signal provided at the
SAT/SUB output:
– Flat: signal is not processed
– 60: cutoff frequency at 60 Hz
– 80: cutoff frequency at 80 Hz
(9) SAT/SUB (output)
Output for satellite system to be connected. This signal is pro-
cessed according to the Highpass setting.
Dynaudio Professional BM14S II manual.indd 5 2014-02-24 14:45