Dynaudio 9S, Руководство пользователя

Страница: 7 / 25

Before you start
Unpacking the subwoofer
▪
Unpack the subwoofer on a clean, flat and soft surface; floor carpeting is suitable.
▪
The packaging should be opened from the top (1). Remove all accessories packed with the subwoofer (such as the AC
power cord). Do not remove the top part of the protective material.
▪
With the protective material still in place but with accessories removed, carefully tilt the packaging on its side (1) and tilt
again to turn it upside-down (2). Ensure that no part of the top-cover is obstructing the opening at the top.
▪
The outer packaging can now be lifted away from the subwoofer itself (3). Remove the protective material that now is on
top.
▪
Open the bag and remove it from around the base of the subwoofer.
▪
Again, carefully tilt the subwoofer on its side and again to turn it onto its feet. Note that the top part of the protective
material will now come off easily so ensure that the subwoofer doesn’t drop or slide away in the process.
Check that the contents are complete:
▪
Subwoofer: The factory-set power requirements (refer to label on rear of subwoofer) should correspond to the territory in
which the subwoofer was purchased. Refer also to the
Important safety instructions .
▪
AC mains lead. The supplied lead should be suitable for the territory in which the subwoofer was purchased.
▪
This owner’s manual.
Before you start 7