Dynatronics Dynatron T3 Скачать руководство пользователя страница 26

WarranTy

DYNATRON® T3™ HI-LO TREATMENT TABLE & T4™ TRACTION TABLE  |  OPERATOR’S MANUAL REV. 10 | 4/4/2018

23

Warranty

DYNATRONICS CORPORATION warrants this product to be free from factory defects in materials and workmanship under normal use from the date of 

purchase by the original owner for the periods specified as follows:  The metal frame is warranted for FIVE YEARS.  The motor is warranted for the original 

manufacturer’s warranty period of ONE YEAR.  The upholstered top is warranted for ONE YEAR against factory defects.  Other parts are warranted for 

TWO YEARS.  If this product is defective within the warranty period specified, DYNATRONICS will, subject to the conditions set forth below:

(1)  repair or replace defective parts at no charge within a reasonable period of time with new or remanufactured parts, at DYNATRONICS’ option; and

(2)  provide labor for the repair or replacement of defective parts under this warranty without charge.

Parts used for replacement under this warranty are warranted for the remainder of the original warranty period.  THE REPAIR OR REPLACEMENT OF 

DEFECTIVE PARTS SHALL CONSTITUTE THE SOLE AND EXCLUSIVE REMEDY IN THE EVENT OF A BREACH OF WARRANTY.  Dynatronics 

may specify whether the product or part must be shipped to Dynatronics for repair, or whether the repair will be performed on-site by a qualified 

technician approved by Dynatronics.

REGISTRATION REQUIRED:  In order for this warranty to be valid, the warranty registration page (included in this operator’s manual) must be filled 

out and returned to DYNATRONICS within 10 days of the date this product is delivered to the original owner.  A copy of an invoice or receipt may be 

requested to verify purchase date.

REPAIRS:  All repairs must be performed by qualified personnel.  Any modifications or repairs by unqualified parties will void this warranty.

OBTAINING WARRANTY SERVICE:  Authorization by DYNATRONICS is required before obtaining service under this warranty. Call DYNATRONICS’ 

CUSTOMER SERVICE at 1-800-874-6251 to make arrangements for warranty service.

PACKAGING AND SHIPPING:  Any item shipped to an authorized service facility for service under this warranty must be in the original shipping 

carton, freight prepaid, fully insured, and/or otherwise properly packed to prevent damage.  DYNATRONICS is not liable for any damage to the item 

while in transit.  Include a summary of the problem with the product.  Write the return authorization number obtained from DYNATRONICS on the 

shipping label.

SHIPPING COSTS:  Within the first 30 days of the warranty period, DYNATRONICS will pay all necessary shipping costs associated with obtaining 

service under this warranty.  After the first 30 days of the warranty period, the owner is responsible for all costs associated with shipping the product or 

part to an authorized service facility.  DYNATRONICS will pay all costs associated with shipping the product or part back to the owner after service is 

completed, and will ship the product using the same carrier or type of carrier and service that was used by the owner for the incoming shipment.

EXCLUSIONS:  Any defect, malfunction or failure caused by or resulting from improper installation, service, maintenance or repair, or from abuse, neglect, 

transportation, accident, act of God, or other cause beyond the control of DYNATRONICS will not be covered by this limited warranty.  ANY IMPLIED 

WARRANTIES COVERING THIS PRODUCT, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR 

A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO TWO YEARS FROM THE DATE OF PURCHASE BY THE ORIGINAL OWNER.  

DYNATRONICS SHALL NOT IN ANY CASE BE LIABLE FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR OTHER SIMILAR 

DAMAGES ARISING FROM BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, OR ANY OTHER LEGAL THEORY EVEN IF 

DYNATRONICS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW LIMITATIONS ON HOW 

LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE 

ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY 

ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

For more information concerning repairs, operation, or technical assistance, please contact the DYNATRONICS dealer nearest you, or contact 

DYNATRONICS directly at 1-(800) 874-6251.

Dynatronics Corporation

7030 Park Centre Drive  •  Salt Lake City, Utah  84121  •  (801)  568-7000  (800)  874-6251

Содержание Dynatron T3




























Отзывы: