15
Split
Split
The split mode of the piano allows you to select and play two different voices with your left
and right hands. For example, play bass with the left and piano with the right.
PLAYING WITH THE SPLIT VOICE
① Select a main voice.
Select a voice in the normal way. (See the
SELECTING VOICE
section on page 13.)
② Call up the split mode.
To call up the split mode, press the
SPLIT
button. Lamp lights and
the split is set on.
③ Select the split voice.
Select a voice in the normal way. (See the
SELECTING VOICE
section on page 13.)
ADJUSTING THE SPLIT VOLUME
This determines the volume of the split voice.
☞ If you select a split voice, layer function automatically can be on without
pressing the
SPLIT
button.
CHANGING THE SPLIT POINT
You can set the point dividing the split voice and main voice ranges at any desired key position.
☞ Default value is F#3.
① Press and hold the SPLIT button.
② Press a desired key.
The pressed key is assigned to new split point.
▼
Split point (F#3)
② Adjust the split volume by pressing secondary volume up(D#4) and down(C#4) keys.
① Press and hold the SETUP button.
☞ The lamp is on.
☞ Refer to the
FUNCTION KEY MAP
on page 9.
☞ If you press both
UP
and
DOWN
keys at the same time, it automatically returns to the default secondary
voice Volume (11). The range of volume is 0 ~ 16.
☞ Hold the key for continuous decrementing or incrementing.
☞ Both split and layer volumes can be adjusted by using secondary volume keys.
SDP500 영영 영영영 Rev1_SDP500 영영영 (영영).qxd 2012-05-23 영영 4:57 Page 15
