14
LAYER
Layer
The layer mode of the piano allows you to select and play two different voices
simultaneously in a layer. This makes it easy to create exceptionally rich and thick tonal
textures. The volume balance can be set for the two voices.
PLAYING WITH THE LAYER VOICE
① Select a main voice.
Select a voice in the normal way. (See the
SELECTING VOICE
section on page 13.)
② Call up the layer mode.
To call up the layer mode, press the
LAYER
button. Lamp lights and
the layer is set on.
③ Select the layered voice.
Select a voice in the normal way. (See the
SELECTING VOICES
section on page 13.)
ADJUSTING THE LAYER VOLUME
This determines the volume of the layered voice.
② Adjust the layer volume by pressing secondary voice volume up(D#4) and down(C#4) keys.
☞ Refer to the
FUNCTION KEY MAP
on page 9.
☞ If you press both
UP
and
DOWN
keys at the same time, it automatically returns to the default secondary
voice volume (11). The range of volume is 0 ~ 16.
☞ Hold the key for continuous decrementing or incrementing.
☞ Both split and layer volumes can be adjusted by using secondary volume keys.
① Press and hold the SETUP button.
☞ The lamp is on.
☞ If you select a layer voice, layer function automatically can be on without pressing
the
LAYER
button.
+
SDP500 영영 영영영 Rev1_SDP500 영영영 (영영).qxd 2012-05-23 영영 4:57 Page 14
