Layer
Layer allows the player to sound two voices simultaneously when playing a key.
q
Choose the desired main voice first.
Refer to page 14 for voice selection
.
w
Press LAYER.
The Layer mode will be activated, indicated by the LED which shows current Layer voice number.
e
Choose the desired Layer voice.
Refer to page 14 for voice selection
.
B
a
si
c C
o
n
tr
o
ls
L
a
y
e
r
/ L
a
y
e
r
V
o
lu
m
e
16
Layer Volume
By adjusting the Layer Voice volume, the balance between volumes of the Main and Layer voices may
be adjusted.
q
Enter the SETUP mode to adjust the Layer volume.
Press
SETUP
, then use the
LAYER VOICE VOLUME Up/Down
buttons to adjust the Layer volume. The
LED will display the current value.
☞
Pressing both
LAYER VOICE VOLUME Up/Down
buttons simultaneously will restore the default value (50).
☞
When the LED is showing the Layer volume value, the
DATA Up/Down
buttons may be used instead of the
LAYER
VOLUME
buttons.
☞
The numerical range of the volume is 0~100.
☞
Keep a button pressed to quickly navigate through the values.
☞
Default Voice:
6-2 (Slow Strings)
w
When you're done adjusting, press SETUP again.
This will allow the piano to return to performing mode.
②
①