2
INSTRUCTIONS: IN-3000 Cod: DYN 26.0
6
Date: 2
0
/
10
/20
20
Revision: 0
6
1 GENERAL INSTRUCTIONS
Instantaneous safety gear are not regulated. The maximum P+Q depends on the lift tripping speed.
Their features are indelibly shown next to the approval password and serial number on the identification
stickers attached to the safety gear (see section 2.1).
It is strictly forbidden:
a) To combine and assemble safety gear boxes with different serial numbers.
b) To use a pair of safety gears for installations with characteristics different from those indicated on that
pair of safety gears’ protection plates.
c) To handle any of the safety gear’s components.
DYNATECH DYNAMICS & TECHNOLOGY, S.L. cannot be held responsible for the damage caused due to
the non-observance of any of these general instructions.
2 SAFETY GEAR IDENTIFICATION AND CHARACTERISATION
2.1 IDENTIFICATION
Figure 1: Safety gear identification
2.2 SAFETY GEAR’S FEATURES AND USE
a) Guide rail models to use with this safety:
Type:
T65/A
T70-1/A
T82/B
T75/A
Surface
Cold Drawn
Cold Drawn
Machined
Cold Drawn
Guide rail thickness
8
9
9
10
Guide rail width
20
34
34
30
Minimum braking width
-
27
27
27
* Allowable tolerances for guide rail thickness should be within the limits set by the standard: ISO
7495:197.
b) The maximum tripping speed for this safety gear is strictly stipulated in the regulation requirements.
Maximum rated speed
(m/s)
Maximum tripping speed
(m/s)
Car
0,63
1
Counterweight
1
1,5
SAFETY GEAR IDENTIFICATION LABEL
1
EU type examination certificate number
6
Guide rail type
2
Quality assurance CE marking and notified body
number
7
Guide rail thickness (mm)
3
Safety gear type
8
Serial number
4
Safety gear model
9
Dynatech address
5
Total load (P+Q)/kg for an actuation speed of 1
m/s
10
QR product traceability code
Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the
customer area in Dynatech’s website in order to consult the full manual; http://customers.dynatech-elevation.com/
Содержание IN-3000
Страница 2: ......
